Banner
Home > Products >> Fiber Laser Cutting Machine

1325YAG Laser Cutting Machine

1325YAG Laser Cutting Machine

Product Details

Introduction

The 1325YAG Laser Cutting Machine is manufactured by aerospace standards and is extruded by 4300 tons of pressure. After aging treatment, its strength can reach 6061 T6, which is the strongest strength of all gantry frames. Aviation aluminum has the advantages of good toughness, light weight, corrosion resistance, anti-oxidation, low density and so on.

Laser cutting is the laser beam emitted from a laser that is focused into a high power density laser beam via an optical path system. The laser beam is irradiated onto the surface of the workpiece to bring the workpiece to a melting point or boiling point, while the high-pressure gas coaxial with the beam blows away the molten or vaporized metal. As the beam moves relative to the workpiece, the material is finally slit, thereby achieving the purpose of cutting.

Laser cutting processing replaces traditional mechanical knives with invisible beams. The 1325YAG Laser Cutting Machine has high precision, fast cutting, is not limited to cutting pattern limitation, saves materials by automatic typesetting, smooth cuts, low processing cost, etc., and will gradually improve or replace Traditional metal cutting process equipment. The mechanical part of the laser cutter head has no contact with the work, and it will not scratch the working surface during the work; the laser cutting speed is fast, the slit is smooth and flat, and generally no subsequent processing is needed; the cutting heat affected zone is small, the sheet deformation is small, and the slit is narrow ( 0.1mm~0.3mm); no mechanical stress in the incision, no shear burr; high processing precision, good repeatability, no damage to the surface of the material; NC programming, can process any plan, can cut the whole board with large format, no need Open the mold, saving time and economy.

Technical Parameters

Machine model

FASTCUT1325LC

Working area

2500mm*1300mm

Laser power

500w Fiber laser source 150w CO2 laser source

Cutting thickness

20mm (Depend on materials)

Positioning accuracy

±0.02mm

Max.Running Speed

30m/min

Operating temperature

0℃-40℃

Transmission

Imported TBI ball screw

Specified voltage and frequency

220V 50Hz


Feedback